Undecided which construct choices, options, motor, and receiver protocols you chose beforehand when flashing your Betaflight flight controller? Don’t fear, on this tutorial I’ll present you learn how to simply discover out.
Step 1: Enter the CLI Command
Navigate to the “CLI” tab in Betaflight Configurator, and kind standing and press Enter.
Step 2: Find Construct Key
Search for the road beginning with BUILD KEY within the CLI output. Copy this key and exchange [BUILD KEY] within the URL under:
https://construct.betaflight.com/api/builds/[BUILD KEY]/json
Copy and paste the URL into your browser’s tackle bar, you can be directed to a web page like this.
Step 3: Understanding the Output
When you go to the URL, you’ll see detailed details about your present Betaflight construct. The necessary a part of the output will look one thing like this:
"Goal": "BETAFPVG473", "Launch": "4.5.1", "Commit": "4.5.1", "Choices": [ "CLOUD_BUILD", "USE_DSHOT", "USE_GPS", "USE_GPS_PLUS_CODES", "USE_LED_STRIP", "USE_OSD", "USE_OSD_HD", "USE_OSD_SD", "USE_SERIALRX", "USE_SERIALRX_CRSF", "USE_TELEMETRY", "USE_TELEMETRY_CRSF", "USE_VTX" ],
Goal: Signifies the particular flight controller board your firmware is constructed for.
Launch/Commit: The Betaflight firmware model presently put in in your flight controller.
Choices: Options included in your present Betaflight construct. Widespread choices embody:
- CLOUD_BUILD: Permits customers to pick out particular options and protocols within the firmware.
- CORE_BUILD: With “Core Solely” enabled, it gives primary {hardware} drivers with restricted options; customers can not customise this construct, so you’ll not see different choices regardless that they is likely to be included within the construct.
- GPS: GPS assist.
- OSD (SD): OSD performance for analog FPV system.
- OSD (HD): OSD performance for digital FPV techniques like DJI, Walksnail, and HDZero.
- VTX: Allows VTX Desk configuration (for analog FPV techniques), and permits setting channels and energy ranges by way of OSD menu.
- PINIO: Allows PINIO.
- LED_STRIP: Helps addressable RGB LEDs (as much as 32 LEDs).
- Gentle Serial: Allows Software program Serial assist.
If a particular characteristic or protocol you need isn’t listed, you’ll must flash Betaflight firmware once more, by together with the lacking options in your construct choices. Don’t neglect to again up your present configuration earlier than doing so. Right here’s an entire tutorial on flashing Betaflight firmware: https://oscarliang.com/flash-update-betaflight/
Last Ideas
Checking your Betaflight construct choices gives helpful insights, serving to guarantee your drone operates with all supposed functionalities. This talent is particularly helpful for troubleshooting your setup.
Pleased Flying!
